Select your language
04. April 2024
Special rotor coatings for special requirements
The chemical compositions of adhesives, additives or special treatment or cleaning media in industry are becoming increasingly complex. By implementing the latest research results, the properties of these materials are continuously optimised and further developed. On the one hand, this improves the desired properties, such as faster curing mechanisms, better surface treatment, etc., but on the other hand, these materials and substances can in turn force reactions with other materials.
This poses a particular challenge for the dosing and application systems used. Due to new formulations or ingredients, existing dosing systems can no longer be used, or at least have to be modified in order to fulfil the requirements. Of course, this also applies to progressive cavity dispensers and systems. Where there were no problems in the past, these new adhesives cause enormous issues and even lead to complete failure of the dispensing system in some applications.
VISEC is focused on analysing these changed conditions (such as more demanding ingredients or new chemical formulations of the materials) and offering fast, flexible and successful solutions by adapting and further developing the dosing components.
One example concerns the new and special chemical formulation of a primer for surface treatment in the semiconductor industry. The manufacturer of this primer has perfectly adapted the composition with new ingredients to the application and the end product, but at the same time created major problems for the dosing system.
Standard dispensing components were no longer compatible and could no longer be used, as the primer reacts with metallic surfaces. Even the normally very inert and robust hard chrome-coated surface of the rotor of a progressive cavity dispenser reacts with the ingredients of the primer and causes material changes and wear of the rotor in the dispensing system. Even other special coatings react with the material and pose a major challenge to the dispensing system.
VISEC has taken on this problem, drawing on its decades of expertise and experience in the field of chemistry.
A specially developed coating and alloy (including gold particles) has proven to be the perfect solution for this difficult application. As a result, metallic particles from the rotor no longer react with the primer and, in combination with VISEC's hi-per stator (maximum chemical resistance), the primer can now be dispensed and applied to the electronic components without any issues.
VISEC focuses on customer orientation and problem solving. Through knowledge, experience and expertise, effective and uncomplicated solutions are offered and implemented as quickly as possible.
26. January 2024
VISEC - the innovative development partner
The principle of the progressive cavity pump has been known and invented for a very long time. It seemed that all developments and leaps in innovation had already been achieved for this technology. Nevertheless, VISEC has set itself the goal of continuously generating new solutions and ideas for the progressive cavity pump. Completely new approaches and concepts are developed, realised and brought to market maturity step by step. This proves that there are still numerous new development opportunities and improvements within the scope of progressive cavity technology.
VISEC is specifically focussed on implementing new ideas quickly, flexibly and successfully. Decades of expertise and experience in the field of elastomers and compounds make it possible to take completely new approaches and develop and test special mixtures or high-quality formulations, for example to significantly increase the service life of stators.
The aim is always to expand the advantages and benefits of this dosing technology for our customers and, for example, to minimise maintenance costs or downtimes. Innovative products help to consolidate and expand the position of progressive cavity technology as a high-end dosing technology.
VISEC is breaking new ground to get the best out of technology in the field of dosing applications. Last year, for example, the innovative 2R12-4eQ rotor/stator with its unique geometry was presented, as well as completely newly developed and high-quality shaft sealing rings.
This year will see further ground-breaking developments at VISEC and it will be interesting to see which solutions will be released and launched on the market step by step over the course of the year.
VISEC sees itself as a competent development partner for its customers, always on hand with help and advice and offering the best support and development expertise. The experts at VISEC are always available for this purpose.
18. December 2023
SEC / VISEC wishes Merry Christmas and a Happy New Year 2024
Time has flown by far too quickly and Christmas is just around the corner.
We would like to take this opportunity to thank you for the trust you have placed in us and the pleasant cooperation.
We wish all our customers, business partners and their families a peaceful and relaxing Christmas and a healthy and successful New Year 2024.
15. November 2023
Dispensing of abrasive & highly filled pastes (TIM material, thermal pastes, GAP-fillers)
The number of applications of dosing highly filled and abrasive pastes (often with a particle content up to 90 %) is increasing tremendously in the recent years. Especially the use of TIM (Thermal Interface Material) in the Electronics branch as well as in the EV-Industry (Electric Vehicles & E-Mobility) is getting more and more important. The TIM pastes and liquids guarantee a controlled heat transfer at electronic parts and batteries to ensure smooth and stable functions. Also, the risk of damages of these parts due to heat overload is being reduced by these special pastes. The recipes and quality of these materials have been improved during the recent years by adding special ingredients and additives. However, the most important ingredient is still a chemical reactive group with an excellent heat transfer rate. Typically, Aluminium Oxide or Titan Dioxide are used and mixed into these pastes. The feature of these chemicals is a very abrasive behaviour which is going to be a challenge for the dosing and dispensing system. At the same time, precision and accuracy are essential for the features of such electrical parts and battery modules.
The PCP-technology is offering the best solution for dosing of these challenging pastes and liquids. By using a special developed rubber mixture (hi-act) for the stator of the PCP-dispenser, in combination with a special coating of the rotor and drive shaft, VISEC offers a perfect solution to handle such highly abrasive pastes.
At the rotor and shaft side, VISEC has developed a special coating mixture and method to offer a very resistant and hard surface to withstand even extreme influences by very abrasive pastes and liquids. The dosing of such TIM material could be handled in a very smooth and accurate way.
The PCP-technology offers tremendous advantages and benefits when these TIM should be dispensed.
By using the PCP-technology an accuracy and repeatability of +/- 99% could be guaranteed. A clean and safe process will be ensured by the adjustable suck-back of the dispenser.
The special developed rubber material for the stators and coating of rotors extends the life time of the rotor to 4-5 times in comparison to a standard hard-chrome plated rotor assembly and even the life-time of the stator could be extended to 2-3 times compared to a stator with standard rubber.
VISEC is specialized in developing customized compounds for specific applications. Hi-act stator material is especially suitable for dosing applications with highly filled materials and abrasive particles. The features of this rubber compounds guarantee a smooth dispensing process for abrasive particles and the wear and tear of hi-act is quite small compared to other available rubber materials on the market.
Compared to solutions, where the rotor is made of ceramic, the coated rotor assembly offers a wide range of advantages: the surface of the coated rotor is also extremely hard and robust, but less expensive compared to ceramic material. The manufacturing process of the coated rotor itself, is much easier compared to the complex process of producing ceramic rotors. Also, at ceramic parts, there is always the risk of easy breakage and damage.
Due to the perfect combination of hi-act stator and special coated rotor, downtimes and long maintenance times could be avoided. Compared to competitor’s products, the life-time of these parts is much higher. This means less production interruptions, more process reliability and safety, higher quality standard and of course, less costs.
15. June 2023
Micro-Dosing of Solder Paste on PCB-boards and elements.
The dispensing of tiny dots or lines of solder pastes on PCB-boards is getting more and more important. Precision and accuracy are essential for the features of such electrical parts and components. Therefore, the PCP-technology offers tremendous advantages and benefits when these small volumes should be dispensed.
By using the PCP-technology an accuracy and repeatability of +/- 99% could be guaranteed. A clean and safe process will be ensured by the adjustable suck-back of the dispenser.
Typical solder pastes contain mainly metal particles (up to 90 %) and binder. The metal particles are extremely abrasive and are therefore really challenging the dispensing system. By using a special developed rubber mixture (hi-act), in combination with a special coating of the rotor and drive shaft, VISEC offers a perfect solution to handle such highly abrasive pastes. The life time of the rotor could be extended to 4-5 times in comparison to a standard hard-chrome plated rotor assembly and even the life-time of the stator could be extended to 2-3 times compared to a stator with standard rubber.
For applications on PCB-boards or other small and tiny electrical parts, the VISEC D03/UD03 rotor and stator combination, offers dosing quantities down to approx. 0.00025 cc. Smallest dot sizes of solder pastes could be dispensed without any problems.
VISEC is specialized in developing customized compounds for specific applications. Hi-act stator material is especially suitable for dosing applications with highly filled materials and abrasive particles. The features of this rubber compounds guarantee a smooth dispensing process for abrasive particles and the wear and tear of hi-act is quite small compared to other available rubber materials on the market.
At the rotor and shaft side, VISEC has developed a special coating mixture and method to offer a very resistant and hard surface to withstand even extreme influences by very abrasive pastes and liquids. The dosing of micro -dots of solder pastes could be handled in a very smooth and accurate way.
Compared to solutions, where the rotor is made of ceramic, the coated rotor assembly offers a wide range of advantages: the surface of the coated rotor is also extremely hard and robust, but less expensive compared to ceramic material. The manufacturing process of the coated rotor itself, is much easier compared to the complex process of producing ceramic rotors. Also, at ceramic parts, there is always the risk of easy breakage and damage.
Due to the perfect combination of hi-act stator and special coated rotor, downtimes and long maintenance times could be avoided. Compared to competitor’s products, the life-time of these parts is much higher. This means less production interruptions, more process reliability and safety, higher quality standard and of course, less costs.
VISEC offers the core components for PCP-dispenser and therefore tremendous advantages for companies, who intend to design and build their own units. By using existing components, like motor or control units this offers excellent synergy effects. The design of the PCP-dispenser could be adjusted, according to existing corporate design rules or requirements and provides the highest grade of flexibility.
24. May 2023
SEC takes another step towards becoming a system provider:
New: VISEC Accessories.
With shaft seals and O-rings specially adapted to the applications of the VISEC D- and R-series, SEC meets the requirements of the international market for high-performance metering for accessories of impeccable quality and readily available.
VISEC shaft seals meet the high demands on functional reliability and service life without restriction - even under extreme continuous load of VISEC stators and rotor units. Lowest possible wear due to high resistance to chemicals and temperatures are the primary advantages of VISEC shaft seals made of hi-Q seal.
SEC will successively expand its VISEC accessories portfolio in a customer-oriented manner and thus offer its partners efficient system solutions in the sense of "All-in-One" - for precise and gentle metering of of highly viscous media.
13. April 2023
Trade show: productronica China 2023.
We have great news for our customers and prospects in China! Visit our sales partner „VISEC(XIAMEN) TECHNOLOGY CO., LTD“ at this year's "productronica China", which will take place from April 13th to 15th, 2023 at the Shanghai New International Expo Centre (SNIEC). Our booth with the number W5.5852 is waiting for you there.
The "productronica China" fair is the leading trade fair for electronics manufacturing in Asia and an excellent opportunity to present our latest products and technologies. Visit us at our booth and learn firsthand how our products can help you optimize your production processes and increase efficiency. Our sales partner will be happy to answer all your questions and give you an insight into our latest developments.
We look forward to meeting you at the fair.
27. March 2023
VISEC takes of: With a strong partner on the American market.
The company "Air Flo Spray Equipment Company", which is active in the USA, has become a sales partner for VISEC with immediate effect. The aim of the cooperation is to further expand VISEC's presence in the American market and to serve customers even better through a sales partner from close proximity.
The Air Flo Spray and Equipment Company has been a major distributor of fluid transfer equipment used for lubricants, sealants, adhesives, inks and more for more than 50 years. Since 1965, Air Flo has been providing advanced dispensing equipment to customers throughout the United States of America.
Just like VISEC products, Air Flo stands for reliability, quality and efficiency.
28. February 2023
A geat innovation - VISEC 2R12-4eQ
With a real innovation, the VISEC R-series is extended by another Stator 2R12-4eQ and the corresponding Rotor unit UR12-4eQ.
Due to the unique and innovative 4-flight metering geometry, significantly higher flow rates and metering volumes can be achieved while maintaining the small size. The small space consumption as well as the relatively low weight prepare the new size "VISEC 2R12-4eQ" perfectly for automated applications and solutions, for example with robots and axis systems. This provides cost and investment savings for all VISEC customers. Smaller dimensioned robots can be used, which take up little space and thus represent low investment costs.
Thanks to the "VISEC Plus System" it is possible to use both sizes 3R12 and 2R12-4eQ in one and the same pump housing. Thus, a dosing volume of 2.30 ml/rev to 9.10 ml/rev can be covered within one pump environment. This increases efficiency and flexibility within the manufacturing process enormously.
With highest precision and dosing accuracy, the new size 2R12-4eQ is perfectly suited for feeding systems (e.g. drum emptying) or also for processing systems (e.g. degassing). The areas of application are very diverse and can be found, for example, in e-mobility, display bonding or also in electronics manufacturing.
26. January 2023
New sales partner in South Korea
VISEC wins the company Altech as a sales partner for South Korea. In close cooperation with SEC's German headquarters, Altech will expand sales of VISEC products on the South Korean market as exclusive sales partner with immediate effect.
As the fourth largest economy in Asia, Korea also offers very good market opportunities for VISEC. The quality demand on the South Korean market is extremely high. VISEC has already been supplying the Asian markets for several years. With the help of the new sales partner, it is now possible to respond and react to customer requirements even faster and more specifically.
As the potentials for VISEC products on the South Korean market are enormous, it is a real milestone to cooperate now with a sales partner on site.
23. December 2022
Merry Christmas & Happy New Year.
Christmas is almost here and an eventful year is coming to an end.
We would like to take this opportunity to thank you for the trust you have placed in us and the valuable cooperation.
We wish you a merry Christmas holiday and a healthy and successful new year.
20. June 2022
Simplifies production processes: The VISEC Plus system
With the VISEC Plus system, it is possible to use different VISEC Stators and Rotor units in one particular metering pump type. Due to the identical external dimensions of the components, it is therefore not necessary to make a design adaptation for each dosing volume.
For example, in the field of micro dosing, Stators and Rotor units of three different sizes (D03 micro, D15 micro and D45 micro) can be used in one and the same pump housing. This means that a metering volume of 0.003 ml/rev to 0.05 ml/rev can be covered for this type of pump.
This makes production processes faster and more efficient. Operators are able to react flexibly to the requirements of their markets and can save costs at the same time.
The VISEC Plus system is unique in the market for "high-performance dispensing systems".
23. March 2022
Trade mark registration in GB and Northern Ireland.
Since the withdrawal agreement between the EU and the UK came into force on 1 February 2020 (Agreement on the Withdrawal of the United Kingdom of Great Britain and Northern Ireland from the European Union and the European Atomic Energy Community, Official Journal of the European Union 2019/C384 I/01), the UK is in any case no longer a member of the EU.
It was therefore all the more important to register and thus protect the VISEC trademark in the UK and Northern Ireland.
VISEC was registered as a trade mark with effect from 21/09/2021 and finally entered in the register on 04/02/2022.
VISEC stands for precision, high quality and reliability. With these values we will continue to exploit the market potential in the UK and Northern Ireland in the future.
10. March 2022
The VISEC R-series is expanded.
The VISEC R series is being expanded with the new 3R12 Stator and the corresponding UR12 Rotor unit. With a flow rate of 2.30 to 276 ml/min, this Stator-Rotor combination is prepared for a wide range of applications.
In the development of this new size, it was particularly important that this system can be used both in the area of dosing and in the area of drum emptying. A high volumetric output is achieved with the best precision.
Especially in the field of dosing technology, very high precision is a prerequisite for an efficient and error-free process. With a repeat accuracy of over 99%, VISEC customers can fully rely on a smooth dosing process.
No matter in which areas the new "VISEC 3R12" is used, it convinces with precision, the usual VISEC quality, reliability and a high volumetric performance.
01. February 2022
Happy New Year.
We wish our Chinese business partners and customers a successful and good year 2022 - The Year of the Tiger.
Among other things, the tiger stands for strength, ambition, self-realization and courage.
We would also like to take these qualities with us into the new year in order to further strengthen our good business relations in China and to achieve further joint successes.
17. December 2021
VISEC wishes you a Merry Christmas and a Happy New Year 2022.
Especially in these turbulent times, we all appreciate the special value of reliable partnerships.
We would like to thank all customers and business partners for the trusting and successful cooperation this year and send you our warmest Christmas greetings this way.
We wish you and your families a wonderful Christmas season, good health and all the best for 2022!
23. June 2021
The perfect addition to the D-series
The new stator in the D-series convinces with an even smaller dosing volume than the previously smallest stator "VISEC D15 micro". With a minimum dispensing volume of approx. 0.00025 ml and a dispensing volume of approx. 0.003 ml per revolution, the new stator "VISEC D03 micro" perfectly complements and expands the VISEC product range in the field of micro dispensing technology. No other PCP system on the market is able to dispense these extremely small quantities.
Due to the special development of the stator-rotor system, a comparatively high pressure can be generated. This means that these very small quantities can be metered proportionally to the angle of rotation and without pulsation. With a repeatability of more than 99%, customers can rely on precise dosing from low- to high-viscosity media.
The new "VISEC D03 micro" stator has identical external dimensions to the two "VISEC D15 micro" and "D45 micro" stators. In combination with the respective matching rotor unit, these systems can be used in a modular way. With one and the same pump environment, it is thus possible to cover a wide range of metering volumes. This makes it possible to react flexibly and quickly to constantly changing market requirements.
No matter in which area of micro dispensing technology - whether in the production of electronic components, in optics and photonics, for plant manufacturers or in the field of application technology - the new "VISEC D03 micro" convinces with high quality, reliability and efficiency.
15. March 2021
Continuous improvement guaranteed - renewed certification according to ISO 9001:2015
With the renewed certification according to ISO 9001:2015, we prove once again that we continuously improve our products and processes.
In order to meet the high expectations of our customers, we have our quality, our qualification and our production processes regularly tested and monitored by an internationally recognized company - DQS.
With ISO 9001 certification, we guarantee our customers and partners services at the highest quality level and maximum process reliability.
In the area "Download / Service" you can download the latest certificate as PDF file in English.
26. January 2021
VISEC as a strong brand.
Since the launch of the VISEC product line in March 2019, it has already established itself as an independent brand. Since January 03, 2021, VISEC is now also officially registered as a trademark at the European Union Intellectual Property Office and thus protected.
The VISEC brand stands for high quality, reliability and precision. Taking these values into account, the products around the VISEC brand are constantly being further developed. In this way, the high demands of the market can be met and customers can rely on the best quality when purchasing a VISEC product.
16. December 2020
VISEC wishes you a Merry Christmas.
What a crazy year it has been. Corona has turned a lot of things upside down. However, it showed us that the crisis also makes us stronger. With our combined strength, we overcame the challenges and made the best of the situation.
Thank you for remaining loyal to us in this difficult year!
We wish you a peaceful Christmas and a healthy and successful New Year.
30. June 2020
The newcomer in the microdosing technology family.
With a dosing volume of 0.01 cc per rotation and a minimum dosing quantity of 0.0008 cc, the new stator "VISEC D15 micro" is the smallest in the D-series. With the specially developed elastomer compound "hi-tec", this stator is perfectly prepared for the exact delivery of a wide range of media under extreme conditions. The developed SEC formulation is, in addition to conveying oils, silicones and methyl acrylates, especially suitable for conveying cyanoacrylates.
Even before its market launch, the smallest unit was able to convince in practice with its high-precision, pulsation-free and material-friendly metering.
In combination with the perfectly matched rotor unit "VISEC UD15 micro", constant and precise dosing is possible. The thin and highly resistant elastomer compound "hi-tec" from SEC also provides optimum protection for this rotor unit, while at the same time ensuring flexibility of the rotor shaft.
The external dimensions of the new "VISEC D15 mirco" stator are identical to those of the "VISEC D45 micro". This allows to work with these two different sizes in the same pump. This creates flexibility within the production process and allows easy expansion of the possible dosing quantities.
For further information please refer to the product data sheets in the "Download / Service" section.
Exhibition China:
Visit our partner "VISEC/XIAMEN-TECHNOLOGY" at the productronica in Shanghai, China from July 03 to 05, 2020. Here you can inform yourself about all VISEC products and look forward to the product presentation of the new "D15 micro".
02. April 2020
We are here for you.
The health and safety of our employees, business partners and customers is our top priority. Therefore, due to the worsening corona pandemic, we have taken measures to prevent the spread of the virus as far as possible.
Nevertheless we are still available for you.
We are at your disposal as a reliable partner for all inquiries. In compliance with the important and necessary hygiene regulations, our services are still available to you.
03. February 2020
ISO 9001 : 2015
In order to meet the dynamic requirements of global competition, it is important to constantly increase efficiency and reduce costs.
By applying a quality management system, we ensure that SEC Compounds GmbH is continuously developing and attaches great importance to customer satisfaction. Therefore we were certified again according to ISO 9001 : 2015 in January 2020.
In the area "Download / Service" you can download the certificate as PDF file in English.
25. January 2020
To further success in 2020.
We wish our Chinese partners and customers a successful year 2020 - health and good luck in the Year of the Rat.
Last year we were able to further expand our partnership with our Chinese cooperation partner VISEC (XIAMEN) TECHNOLOGY CO., LTD. Due to the close cooperation we could already achieve success on the expanding Chinese market.
In 2020 we would like to further strengthen this successful cooperation in order to meet the customer requirements on the Chinese market.
18. December 2019
SEC wishes you a Merry Christmas.
Time has passed much too quickly.
Therefore we would like to pause for a moment at Christmas time and thank all our customers and business partners for the successful cooperation.
We wish you a happy holiday season and a successful and healthy start into the new year.
18. October 2019
VISEC shows colours on the Chinese Market
The VISEC sales partner XIAMEN TECHNOLOGY CO., LTD in XIAMEN-City and the headquarter of SEC in Germany decided to cooperate even closer: With effect of October 7th, 2019, the name of the newly founded company is „VISEC/XIAMEN- TECHNOLOGY”, the official sales partner for VISEC stators and rotors.
For the distribution of VISEC stators and rotors on the expanding Chinese market this is a further dynamic impulse. SEC is now able to follow the interests of Chinese customers and the trends in China even closer and can react faster to specific requirements.
Both companies, SEC and VISEC/XIAMEN TECHNOLOGY now have good basic conditions for a successful involvement in China.
31. September 2019
SEC starting Rotor Unit Program
SEC now offers precise VISEC Rotor units matching the VISEC Stators R- and D-series precisely. Our VISEC modules are the necessary precondition for a process-optimized increase of productivity – for example, by reducing setup times and improving the repeatability for high demands – also during long-term operation.
A special quality feature for permanent accurate application is the high-resistant elastomer compound “hi-per”, protecting the flexible shaft of the Rotor Unit efficiently.
VISEC Rotor Units are made in Germany on our premises and are subjected to strict quality control tests.
25. July 2019
Made to suit miniaturization of production processes
Miniaturization is the key to the future of automation. One of the main driving force in this direction is the electronic industry. The challenge for innovative bonding technology on minimum space is increasing constantly.
This trend began a few years ago with progressive evolution, which was one of the main reasons for SEC Compounds GmbH to bring stators and rotors of the VISEC D series for micro-dispensers to the market. Before introducing the modules D45 micro and D60 micro to the market, they proved their reliability after intensive testing with high-viscosity media.
The VISEC micro stators reach under extreme conditions and continuous use with short cycle operation times and minimal material quantities highest process reliabilities – with almost loss-free reproducibility.
In this context, the SEC elastomer compounds "hi-pro" and "hi-per" in the stators have a very essential function to ensure the quality. The especially designed SEC recipes for these compounds are prepared for accurate conveyance of adhesives, epoxy resins or heat-conducting paste with minimum wear of the stator. The VISEC components of the D series with minimal geometries give a significant contribution to this high productivity in different applications.
31. May 2019
High acceptance of stators and rotors of VISEC R-series
After the launch in March 2019, SEC Compounds GmbH registered a clearly positive response in the high-performance market for the VISEC 3R8 and 3R10 series adhesive technology.
Various customers have already successfully completed tests on our stators in conjunction with dispensers under operating conditions. First contracts are being concluded.
This success is based on the high degree of flexibility which stands for the VISEC stators and rotors while dosing with the highest volumetric accuracy. Even complex geometries in the smallest possible design can be realized with VISEC for dosing smallest quantities starting from 0,03cc.
It shows already that plant manufacturers and users have waited for these start-up products of the VISEC R-series -as an alternative to existing offers on the market- to concretise sustainable economic solutions.
On her production site in Germany, Baden-Wuerttemberg, is SEC well prepared to develop individual components within a short period of time and to provide requested high quantities in constant top quality.
04. March 2019
VISEC starts with high pressure
The market for dosing technology of highly viscous media has been clearly expansive in the last years. SEC Compounds GmbH, based in Kirchheim/Teck and leading manufacturer of rubber compounds for stators – the most important mechanical component of dispenser-systems – have been continuously observing this trend of a growing demand.
Beginning of March 2019 SEC launched their own program of stators and rotors under the brand name VISEC, designated for the international market. To start up, one series in each the standard- and the micro-segment is beeing offered.
Optimistic projections for SEC derive in particular from the longstanding expertise in technology-relevant elastomer compounds (hi-pro and hi-per), used in stators and being the key to their high reliability in permanent operation in a wide range of applications. With their solutions to the ever changing requirements of the market, SEC have successfully taken on all challenges and facilitated progress.
Seen from this angle, it’s an obvious step next to the standardized VISEC-series, the main focus of SEC lies in the development of customized solutions. Practice shows that especially multi-functionality, changed geometries of dispensers or new materials lay down new requirements for the innovation of stators. SEC contributes her knowledge, extensive know-how and strong performance power to all projects.
SEC Compounds GmbH
Karl-Arnold-Straße 28
D-73230 Kirchheim-Teck
Phone: 0049 70 21 - 94 48-0
Fax: 0049 70 21 - 94 48-99
info@sec-compounds.com
